The fourth axis turntable brings great convenience for machining, but we need to understand its operating procedures.

When operating the fourth axis machine, we should pay attention to safety. Only on the premise of ensuring safety, can we work well. First of all, the workers themselves should have a certain understanding of the specific performance and structure of Bai Xuchen's fourth axle, otherwise, accidents will easily occur once the place that cannot be touched is touched. The necessary protective equipment for working must be worn before operation. Before starting the machine, check the transmission system and protection system to see if they are still firm. If they are not firm, do not start the machine.

The lubrication system is critical for the fourth shaft of BAIXCHEN. Before starting the machine, check whether the lubricating oil is sufficient. Check whether the hydraulic pressure and cooling device are normal, and whether various operation buttons are still flexible. The moving path of the workpiece shall be carefully checked to see if there is any obstacle. If there is any obstacle, it shall be removed. Check whether the tool is above the centerline and whether the fan and exhaust device are open. After checking everything, make sure it is correct, and then start the machine.

After starting up, the fourth axis turntable is in operation. At this time, you can't leave your post without permission, or you can't leave when you are working. You should pay attention. Otherwise, once the machine breaks down, or your clothes are rolled in carelessly, it will easily lead to accidents.

The use environment must eliminate interference, especially electromagnetic interference. Because this kind of equipment is operated by numerical control programming, electronic equipment is afraid of electromagnetic interference. During the operation of the machine, there should be no equipment with excessive vibration around, and the ambient temperature of the machine should not be too high. Power maintenance is also very important, for example, regularly check whether the lines are damaged or aging, and make troubleshooting records.