新闻中心

You Are Here: Home - News >> Company News

Uniform Adjustment Method of CNC Indexing Disc

2021-07-22 10:10:20
times

CNC indexing disc is widely used in milling machines, drilling machines and machining centers. With the four axis operation interface of the machine tool, simultaneous four axis machining can be performed. Today, I would like to tell you about the uniform adjustment method of the CNC indexing table:


1. When using the CNC indexing wheel, it generally moves clockwise. During the vibration, the speed shall be as uniform as possible. Once it is skipped, the indexing handle shall be returned for more than half a turn to eliminate the gap, and then the positioning pin shall be gradually inserted into the normal position in the original direction.



2. Adjust the elevation of the spindle of the indexing head of the CNC indexing table. Do not loosen the two socket head cap screws on the top of the base near the front of the spindle. Otherwise, the position of the spindle will move to zero and the impact of hammering and other objects will be stopped. The tooth backlash of the indexing head worm and worm gear of the indexing plate is adjusted properly. Too tight and simple will wear the worm gear, and too loose will reduce the accuracy.

The label

0

browse:

Related products

Related news