The personnel operating the NC turntable must receive professional training, pass the assessment of the safety production supervision department, and be approved by the company before operation. It is necessary to standardize the safe operation and safe driving of the NC turntable. Every NC turntable personnel should know the safety requirements. Let's also know about them.

1. Before and after the operation of CNC rotary table, the appearance shall be checked, and fuel, lubricating oil and cooling water shall be added.

2. Check the starting, running and braking safety performance.

3. Check whether the lights and braking signals are complete and effective.

4. During the operation of the NC rotary table, check whether the pressure and temperature are normal.

5. After running, the NC turntable shall also be checked for leakage and the seals shall be replaced in time.

Attention shall be paid to safety in the use of NC turntable. The above is only a part of the safety requirements. NC turntable personnel must carefully study and strictly abide by all operating procedures, and be familiar with the performance and operating area of the NC turntable.